Removing The Itb Unit - Canon MF735C Series Service Manual

2. Open the Secondary Transfer Feed Unit, and then remove the Secondary Transfer Feed Unit.
NOTE:
Remove the Secondary Transfer Feed Unit by lifting the whole unit and moving it to the left while pushing down the gear on the
left with a finger so that the gear does not interfere with the unit.

Removing the ITB Unit

■ Preparation
1. "Removing the Toner Cartridge" on page 85
2. "Removing the Left Cover" on page 86
3. "Removing the Right Cover" on page 88
4. "Removing the Rear Cover Unit" on page 90
5. "Removing the Secondary Transfer Feed Unit" on page 143
■ Procedure
CAUTION:
• Place the ITB Unit on a sheet of paper.
• Be sure not to damage or touch the ITB Unit.
1. Remove the Connector Cover on the rear right side of the host machine, and disconnect the connectors.
1x
2x
144
5. Parts Replacement and Cleaning