Removing The Itb Unit - Canon imageRUNNER ADVANCE C350 series Service Manual

4
Disassembly/Assembly > Image Formation System > Removing the ITB Unit > Procedure
CAUTION:
When the Drum Unit [1] is installed to the host machine, if the Drum Unit is not installed
properly, the Waste Toner Container [2] will protrude. As a result, when closing the Front
Cover [3], the Front Cover [3] interferes with the Waste Toner Container and cannot be
closed in some cases. When installing the Drum Unit [1] to the host machine, be sure to
install the Drum Unit [1] properly by inserting it until it stops.
4 Disassembly/Assembly > Image Formation System > Removing the ITB Unit > Procedure
[1]
[2]
[3]
F-4-280

Removing the ITB Unit

■ Procedure
NOTE:
If the duration level of the ITB Unit and that of the Secondary Transfer Outer Roller Unit
are not equal, a color displacement may occur in the output image.
CAUTION:
• Place the paper [1] on a level space so as not to damage the ITB [2].
4-115
F-4-281
[2]
[1]
F-4-282
4-115