Dot1X Retry-Version-Max; Dot1X Supp-Proxy-Check - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – 802.1x

1.1.12 dot1x retry-version-max

Syntax
dot1x retry-version-max max-retry-version-value
undo dot1x retry-version-max
View
System view
Parameter
max-retry-version-value: Maximum number of times that a switch will resend version
request packets to a supplicant system. This argument ranges from 1 to 10.
Description
Use the dot1x retry-version-max command to set the maximum number of times that
a switch will resend version request packets to a connected supplicant system.
Use the undo dot1x retry-version-max command to revert to the default value.
By default, the switch can send version request packets to an access user for up to
three times repeatedly.
Having sent a version request packet to the supplicant system, the switch will resend
the packet if within a preset period (as determined by the client version timer) it still has
not received any response from the supplicant system. When the number set by this
command has reached and there is still no response from the supplicant system, the
switch will continue its following authentication without sending further version requests.
This command applies to all ports.
Related commands: display dot1x, dot1x timer.
Example
# Configure the maximum number of times that the switch will resend version request
packets to be 6.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] dot1x retry-version-max 6

1.1.13 dot1x supp-proxy-check

Syntax
dot1x supp-proxy-check { logoff | trap } [ interface interface-list ]
undo dot1x supp-proxy-check { logoff | trap } [ interface interface-list ]
Chapter 1 802.1x Configuration Commands
1-15