Reset Dns Dynamic-Host - 3Com 7750 Series Command Reference Manual

3Com Swich 7750 Series
Command Reference Guide – DNS
Description
Use the ip host command to add a hostname-to-IP address mapping entry in the
static DNS list.
Use the undo ip host command to remove a mapping entry from the static DNS list.
By default, there is no entry in the static DNS list.
As one hostname can mapped to only one IP address, when you add multiple
hostname-to-address mapping entries with the same hostname, only the last one will
be valid.
Related command: display ip host.
Example
# Configure a mapping entry from the host named aaa to the IP address 10.110.0.1
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] ip host aaa 10.110.0.1

1.1.9 reset dns dynamic-host

Syntax
reset dns dynamic-host
View
User view
Parameter
None
Description
Use the reset dns dynamic-host command to clear the dynamic DNS cache.
Related command: display dns dynamic-host.
Example
# Clear the dynamic DNS cache.
<3Com> reset dns dynamic-host
Chapter 1 DNS Configuration Commands
1-7