Display Pim Rp-Info - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Multicast
Example
# Display the information about the PIM multicast routing table.
<3Com> display pim routing-table
PIM-SM Routing Table
Total 0 (*,*,RP)entry, 0 (*,G)entry, 2 (S,G)entries
(192.168.1.2, 224.2.178.130),
Protocol 0x20: PIMSM, Flag 0x4: SPT
UpTime: 23:59, Timeout after 196 seconds
Upstream interface: VLAN-interface2, RPF neighbor: NULL
Downstream interface list: NULL
(192.168.1.2, 224.2.181.90),
Protocol 0x20: PIMSM, Flag 0x4: SPT
UpTime: 23:59, Timeout after 196 seconds
Upstream interface: VLAN-interface2, RPF neighbor: NULL
Downstream interface list: NULL
Total 2 entries listed
Table 5-4 Description on the fields of the display routing-table command
RP
(S,G)
PIM-SM
SPT
RPF

5.1.9 display pim rp-info

Syntax
display pim rp-info [ group-address ]
View
Any view
Parameter
group-address: Specifies the group address to display. If no multicast group is specified,
the RP information about all multicast groups will be displayed.
Field
5-9
Chapter 5 PIM Configuration Commands
Description
Rendezvous Point
(source address, multicast group)
PIM Sparse Mode
Shortest Path Tree
Reverse Path Forwarding