Display Ip Routing-Table Radix - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol
Summary count: 1
Destination/Mask
100.100.1.1/32
# Display the static routing table.
<3Com> display ip routing-table protocol static
STATIC Routing tables:
Summary count: 1
STATIC Routing tables status:<active>:
Summary count: 0
STATIC Routing tables status:<inactive>:
Summary count: 1
Destination/Mask
1.2.3.0/24
For detailed description of the output information, see Table 1-1.

1.1.7 display ip routing-table radix

Syntax
display ip routing-table radix
View
Any view
Parameter
None
Description
Use the display ip routing-table radix command to display the route information in a
tree structure.
Example
<3Com> display ip routing-table radix
Radix tree for INET (2) inodes 14 routes 10:
Protocol Pre Cost
DIRECT 0 0
Protocol Pre Cost
STATIC 60 0
+--8+--{169.0.0.0
| +-32+--{169.1.1.1
+--0+
| | +--8+--{127.0.0.0
| | | +-32+--{127.0.0.1
| +--1+
| | +--8+--{2.0.0.0
| | | +-24+--{2.2.2.0
1-11
Chapter 1 Static Route Configuration Commands
Nexthop
100.100.1.1
Nexthop
1.2.4.5
Interface
LoopBack0
Interface
Vlan-interface10