Display Dhcp Server Conflict - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – DHCP
Use the undo dhcp server static-bind command to cancel an IP-MAC address
binding.
By default, no IP address in an address pool is statically bound.
It should be noted that:
An IP address can be statically bound to only one MAC address. A MAC address
can be bound with only one IP address statically.
The IP address to be statically bound cannot be an interface IP address of the
device; otherwise the static binding does not take effect. The device of the bound
MAC address can also obtain another IP address.
Example
# Statically bind the IP address 10.1.1.1 to the MAC address 0000-e03f-0305.
(Assume that the interface address pool of VLAN interface 1 already exists and the IP
address belongs to the address pool.)
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] interface vlan-interface 1
[3Com-Vlan-interface1]
mac-address 0000-e03f-0305

1.1.15 display dhcp server conflict

Syntax
display dhcp server conflict { all | ip ip-address }
View
Any view
Parameter
all: Specifies all IP addresses.
ip-address: Specifies one IP address.
Description
Use the display dhcp server conflict command to display the statistics of IP address
conflicts on the DHCP server.
Related command: reset dhcp server conflict.
Example
# Display the statistics of IP address conflicts.
<3Com> display dhcp server conflict all
Address
Chapter 1 DHCP Server Configuration Commands
dhcp server
Discover Time
1-14
static-bind ip-address 10.1.1.1