3Com 7750 Series Command Reference Manual page 627

3Com Switch 7750 Series
Command Reference Guide – AAA, RADIUS, HWTACACS, EAD
Description
Use the display domain command to display the configuration information about one
specific or all ISP domains.
If you execute this command without specifying any argument, the configuration of all
ISP domains will be displayed.
The output information helps ISP domain diagnosis and troubleshooting
Related command: access-limit, domain, radius-scheme, user-template, state,
display domain.
Example
# Display the configuration information about all ISP domains.
<3Com> display domain
0 Domain = system
State = Active
Scheme = LOCAL
Access-limit = Disable
Vlan-assignment-mode = Integer
accounting-mode = time
Domain User Template:
Idle-cut = Disable
Self-service = Disable
Messenger Time = Disable
Default Domain Name: system
Total 1 domain(s).1 listed.
Table 1-1 describes the fields shown in the display.
Table 1-1 Description on the fields of the display domain command
0 Domain
State
Scheme
Access-Limit
Vlan-assignment-mode
accounting-mode
Domain User Template
Field
ISP domain index...Domain name
State
AAA scheme: LOCAL (local authentication), NONE (no
authentication), or RADIUS scheme name
Limit on the number of access users
Dynamic VLAN assignment mode: integer or string
Accounting mode: time (time-based accounting) and
traffic (traffic-based accounting)
Domain user template
Chapter 1 AAA & RADIUS & HWTACACS
Description
1-6
Configuration Commands