Display Ospf Peer - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol
Next hops:
Address
---------------------------------------------------------------
202.38.160.1
202.38.160.2
Table 3-9 Description on the fields of the display ospf nexthop command
Address
Type
Refcount
Intf Addr
Intf Name
nexthop

3.1.20 display ospf peer

Syntax
display ospf [ process-id ] peer [ brief | statistics ]
View
Any view
Parameter
process-id: OSPF Process ID, in the range of 1 to 65,535. If you do not specify a
process ID, this command applies to all current OSPF processes.
Description
Use the display ospf peer command to display the information about OSPF peer.
Use the display ospf peer brief command to display the brief information, including
router ID, interface, and state, about every OSPF peer.
Use the display ospf peer statistics command to display the statistics of every
OSPF peer, namely, the number of peers in various states in every area.
Example
# Display the information about OSPF peer.
<3Com> display ospf peer
Type Refcount
Direct 3
Neighbor 1
Field
Address of next hop
Type of next hop
Reference count of the next hop, namely, number of routes
using the next hop
IP address of the interface to the next hop
Interface to the next hop
Next hop
OSPF Process 1 with Router ID 1.1.1.1
Chapter 3 OSPF Configuration Commands
Intf Addr
202.38.160.1
202.38.160.1
Description
3-25
Intf Name
Vlan-interface2
Vlan-interface2