Idle-Cut - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – AAA, RADIUS, HWTACACS, EAD
user-name user-name: Displays the local user who has the specified user name.
user-name is a character string of up to 80 characters. The string cannot contain the
following characters: /:*?<>. It can contain no more than one @ character. The pure
user name (user ID, that is, the part before @) can contain no more than 55 characters.
vlan vlan-id: Displays the local users belonging to the specified VLAN. The value of
vlan-id ranges from 1 to 4094.
Description
Use the display local-user command to display information about a specific or all local
users, so as to troubleshoot local user configuration.
By default, this command displays the information about all local users.
Related command: local-user, service-type.
Example
# Display information about all local users.
<3Com> display local-user
The contents of local user user1:
State:

Idle-cut:

Access-limit:
Bind location:
Vlan ID:
IP address:
MAC address:
User Privilege: 0
Total 1 local user(s) Matched, 1 listed.
Table 1-2 describes the fields in the above display output.
Table 1-2 Description on the fields of the display local-user command
State
ServiceType Mask
Idle Cut
Active
Disable
Disable
Disable
Disable
Disable
Disable
Field
State of the local user
Service type mark of local user:
T: Telnet
S: SSH
C: Terminal service
LM: lan-access
F: FTP
None: No service type is set.
State of the idle-cut function
Chapter 1 AAA & RADIUS & HWTACACS
ServiceType Mask: T
Current AccessNum: 0
Description
1-8
Configuration Commands