Display Ftp-User; Ftp Server Enable - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – FTP and TFTP

1.1.2 display ftp-user

Syntax
display ftp-user
View
Any view
Parameter
None
Description
Use the display ftp-user command to display the settings of the current FTP user,
including the user name, host IP address, port number, connection idle time, and work
directory.
Example
# Display FTP user settings.
<3Com> display ftp-user
Username
3Com
# If the user name exceeds ten characters, characters behind the tenth will be
displayed in a new line in the left-aligning mode. Take username username@test for
example, the result is:
<3Com> display ftp-user
Username
username@t
est

1.1.3 ftp server enable

Syntax
ftp sever enable
undo ftp sever
View
System view
Parameter
None
Host IP Port
10.110.3.5 1074
Host IP Port
10.110.3.5 1074
Chapter 1 FTP and TFTP Configuration Commands
Idle Homedir
2 flash:/3Com
Idle Homedir
2 flash:/3Com
1-2