Gateway-List - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – DHCP
Example
# Set the lease time of the IP addresses in the global DHCP address pool 0 to 1 day, 2
hours and 3 minutes.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] dhcp server ip-pool 0
[3Com-dhcp-pool-0] expired day 1 hour 2 minute 3

1.1.24 gateway-list

Syntax
gateway-list ip-address&<1-8>
undo gateway-list { ip-address | all }
View
DHCP address pool view
Parameter
ip-address&<1-8>: IP address of a gateway. &<1-8> means you can provide up to
eight gateway IP addresses. When inputting more than one IP address, separate two
neighboring IP addresses with a space.
all: Specifies all configured gateway IP addresses.
Description
Use the gateway-list command to configure one or multiple gateway IP addresses for
the DHCP clients of a DHCP address pool.
Use the undo gateway-list command to remove one or all the configured gateway IP
addresses configured for the DHCP address pool.
By default, no gateway IP address is configured.
If you execute the gateway-list command repeatedly, the new configuration
overwrites the previous one.
Example
# Configure the gateway IP address 10.110.1.99 for the global DHCP address pool 0.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] dhcp server ip-pool 0
[3Com-dhcp-pool-0] gateway-list 10.110.1.99
Chapter 1 DHCP Server Configuration Commands
1-25