3Com 7750 Series Command Reference Manual page 758

3Com Switch 7750 Series
Command Reference Guide – DHCP
If neither subnet mask nor mask length is specified in this command, the default
subnet mask is adopted.
Description
Use the network command to configure a dynamically assigned IP address range
(where IP addresses will be dynamically assigned to DHCP clients).
Use the undo network command to remove a dynamically assigned IP address
range.
By default, no such IP address range is configured for a DHCP address pool.
Note that you can configure only one such IP address range for a DHCP address pool.
If you execute the network command repeatedly, the new configuration overwrites the
previous one.
Related command: dhcp server ip-pool and dhcp server forbidden-ip.
Example
# Configure the dynamically assigned IP address range 192.168.8.0/24 for the global
DHCP address pool 0.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] dhcp server ip-pool 0
[3Com-dhcp-pool-0] network 192.168.8.0 mask 255.255.255.0
1.1.28 option
Syntax
option
ip-address&<1-8> }
undo option code
View
DHCP address pool view
Parameter
code: Customized option number ranging from 2 to 254. Note that this argument
cannot be 3, 6, 15, 44, 46, 50 through 55, 57 through 59.
ascii ascii-string: Specifies a string that is of 1 to 63 characters. Note that each
character of the string needs to be an ASCII character.
hex hex-string&<1-10>: Specifies strings, a hexadecimal number of 1 to 8 digits. The
&<1-10> means that you can provide up to 10 such strings. When entering more than
one strings, separate two neighboring strings with a space.
code { ascii ascii-string
Chapter 1 DHCP Server Configuration Commands
| hex hex-string&<1-10>
1-28
| ip-address