Ssh2 - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – SSH Terminal Service

1.2.8 ssh2

Syntax
ssh2 { host-ip | host-name } [ port-num ] [ prefer_kex { dh_group1 |
dh_exchange_group } ] [ prefer_ctos_cipher { des | aes128 } ] [ prefer_stoc_cipher
{ des | aes128 } ] [ prefer_ctos_hmac { sha1 | sha1_96 | md5 | md5_96 } ]
[ prefer_stoc_hmac { sha1 | sha1_96 | md5 | md5_96 } ]
View
System view
Parameter
host-ip: Server IP address.
host-name: Server name, a string of 1 to 20 characters.
port-num: Server port number. It is in the range of 0 to 65,535 and defaults to 22.
prefer_kex: Key exchange algorithm preference. Choose one of the two algorithms
available.
dh_group1: Diffie-Hellman-group1-sha1 key exchange algorithm. It is the default
algorithm.
dh_exchange_group: Diffie-Hellman-group-exchange-sha1 key exchange algorithm.
prefer_ctos_cipher: Encryption algorithm preference from the client to server. It
defaults to AES128.
prefer_stoc_cipher: Encryption algorithm preference from the server to client. It
defaults to AES128.
des: DES_cbc encryption algorithm.
aes128: AES_128 encryption algorithm.
prefer_ctos_hmac: HMAC algorithm preference from the client to server. It defaults to
SHA1_96.
prefer_stoc_hmac: HMAC algorithm preference from the server to client. It defaults to
SHA1_96.
sha1: HMAC-SHA1 algorithm.
sha1_96: HMAC-SHA1_96 algorithm.
md5: HMAC-MD5 algorithm.
md5_96: HMAC-MD5-96 algorithm.
Chapter 1 SSH Terminal Service
1-23
Configuration Commands