Snmp-Agent Group - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – SNMP & RMON
Parameter
read: Indicates that MIB object can only be read. Only the read-only community can
query device information.
write: Indicates that MIB object can be read and written. The read-write community can
configure the device.
community-name: The community name, a character string of 1 to 32 characters.
view-name: The MIB view name, a character string of 1 to 32 characters.
acl-number: The basic access control list (ACL) number specified by the community,
ranging from 2,000 to 2,999.
Description
Use the snmp-agent community command to configure community access name and
enable the access to SNMP.
Use the undo snmp-agent community command to cancel the settings of community
access name.
Example
# Configure community name as comaccess and permit read-only access by this
community name.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] snmp-agent community read comaccess
# Configure community name as mgr and permit read-write access.
[3Com] snmp-agent community write mgr
# Remove community name comaccess.
[3Com] undo snmp-agent community comaccess

1.1.11 snmp-agent group

Syntax
1) Versions V1 and V2C
snmp-agent group { v1 | v2c } group-name [ read-view read-view ] [ write-view
write-view ] [ notify-view notify-view ] [ acl acl-number ]
undo snmp-agent group { v1 | v2c } group-name
2) Version V3
snmp-agent group v3 group-name [ authentication | privacy ] [ read-view
read-view ] [ write-view write-view ] [notify-view notify-view ] [ acl acl-number ]
undo snmp-agent group v3 group-name [ authentication | privacy ]
Chapter 1 SNMP Configuration Commands
1-10