Display Bgp Paths - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol
Table 5-3 Description on fields of the display bgp network command
Network
Mask
Route-policy

5.1.13 display bgp paths

Syntax
display bgp paths as-regular-expression
View
Any view
Parameter
as-regular-expression: Matched AS path regular expression.
Description
Use the display bgp paths command to view the information about AS paths
Example
# Display the information about the AS paths.
<3Com> display bgp paths 500
Id Hash-index References Aggregator Origin As-Path
---------------------------------------------------
153 80
Table 5-4 Description on fields of the display bgp paths command
Field
Id
Hash-Index
References
Aggregator
Origin
Field
Network address
Mask
Configured route policy
100 <null>
Value of sequence number
Value of Hash-index
Number of routes with reference
Mask length of aggregate route
Origin attribute of route, which indicates that the route updates its
origin relative to the route originating it from AS. It has three
optional values:
The route belongs to inside of AS. BGP treats aggregate
IGP route and the route defined by the command network as
inside of AS, and origin type as IGP.
5-12
Chapter 5 BGP Configuration Commands
Description
IGP 500 {500,400,600}
Description