Reset Counters Interface - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide — Basic Port Commands
Description
Use the port trunk pvid vlan command to set the default VLAN ID for the trunk port.
Use the undo port trunk pvid command to restore the default setting.
To guarantee the proper packet transmission, the default VLAN ID of the local trunk port
must be identical with that of the trunk port on the peer switch connected with the local
trunk port.
Related command: port link-type.
Example
# Set the default VLAN ID of the trunk port Ethernet1/0/1 to 100.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] interface Ethernet1/0/1
[3Com-Ethernet1/0/1] port trunk pvid vlan 100

1.1.30 reset counters interface

Syntax
reset counters interface [ interface-type | interface-type interface-number ]
View
User view
Parameter
interface-type: Port type.
interface-number: Port number.
Description
Use the reset counters interface command to clear the statistics of the port, preparing
for a new statistics collection.
If you specify neither port type nor port number, the command clears statistics of
all ports.
If specify only port type, the command clears statistics of all ports of this type.
If specify both port type and port number, the command clears statistics of the
specified port.
Example
# Clear the statistics of Ethernet1/0/1.
<3Com> reset counters interface ethernet1/0/1
Chapter 1 Port Basic Configuration Commands
1-28