Peer Route-Policy Export - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol
undo peer group-name reflect-client
View
BGP view
Parameter
group-name: Name of peer group, containing 1 to 47 characters.
Description
Use the peer reflect-client command to configure the local device as a route reflector
and configure a peer/peer group as the route reflector client.
Use the undo peer reflect-client command to cancel the existing configuration.
By default, no route reflector or client is configured.
This command only applies to peer group.
Related command: reflect between-clients, reflector cluster-id.
Example
# Configure the peer group "test" as the route reflector client.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] bgp 100
[3Com-bgp] peer test reflect-client

5.1.50 peer route-policy export

Syntax
peer group-name route-policy route-policy-name export
undo peer group-name route-policy route-policy-name export
View
BGP view
Parameter
group-name: Name of peer group, containing 1 to 47 characters.
route-policy-name: The specified Route-policy. The length of route-policy-name
parameter ranges from 1 to 19 character string.
Description
Use the peer route-policy export command to assign the Route-policy to the routes
advertised to the peer group.
Chapter 5 BGP Configuration Commands
5-44