Reset Ospf - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol
Example
# Disable protocol multicast MAC address delivery in the system.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com]undo protocol multicast-mac enable

3.1.45 reset ospf

Syntax
reset ospf [ statistics ] { all | process-id }
View
User view
Parameter
all: Resets all OSPF processes.
process-id: OSPF Process ID, ranging from 1 to 65535. If this argument is not
specified, all OSPF processes will be reset.
statistics: Resets OSPF statistics.
Description
Use the reset ospf all command to reset all OSPF processes.
Use the reset ospf process-id command to reset the specified OSPF process and
clear the statistics.
After you use this command to reset an OSPF process:
Invalid LSA is cleared immediately before LSA times out.
A new Router ID takes effect if the Router ID changes.
DR and BDR are re-elected conveniently.
OSPF configuration before the restart will not lose.
After this command is issued, the system will prompt you to confirm whether to
re-enable OSPF.
Example
# Reset all the OSPF processes.
<3Com> reset ospf all
# Reset OSPF process 200.
<3Com> reset ospf 200
Chapter 3 OSPF Configuration Commands
3-50