Display Pim Bsr-Info - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Multicast
address. For the C-RP messages received, only when their C-RP addresses match the
source address and their server group addresses are subset of those in ACL, can the
be considered as matched.
Related command: acl, and rule.
Example
# Configure C-RP filtering policy on the C-BSR routers, allowing only 1.1.1.1/32 as
C-RP and to serve only for the groups 225.1.0.0/16.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] multicast routing-enable
[3Com] pim
[3Com-pim] crp-policy 3000
[3Com-pim] quit
[3Com] acl number 3000
[3Com-acl-adv-3000] rule 0 permit source 1.1.1.1 0 destination 225.1.0.0
0.0.255.255

5.1.5 display pim bsr-info

Syntax
display pim bsr-info
View
Any view
Parameter
None
Description
Use the display pim bsr-info command to view the BSR information.
Related command: c-bsr, and c-rp.
Example
# Display the BSR information.
<3Com> display pim bsr-info
Current BSR Address: 20.20.20.30
Local host is BSR
Priority: 0
Mask Length: 30
Expires: 00:01:55
Chapter 5 PIM Configuration Commands
5-5