Poe Configuration Commands; Display Poe Interface; Chapter 1 Poe Configuration Commands - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – PoE

Chapter 1 PoE Configuration Commands

1.1 PoE Configuration Commands

1.1.1 display poe interface

Syntax
display poe interface { interface-type interface-number | all }
View
Any view
Parameter
interface-type interface-number: Port on the switch. Refer to Command Manual – Basic
Port Configuration for details.
all: Displays the PoE information of all the PoE ports on the switch.
Description
Use the display poe interface command to view the PoE status of a specific port. If the
all keyword is specified, the command displays the PoE status of all the PoE ports.
Example
# Display the PoE status of Ethernet3/0/1.
<3Com> display poe interface Ethernet 3/0/1
Port power status
Port power mode
Port PD class
port power priority
Port max power
Port current power
Port average power
Port peak power
Port current
Port voltage
Chapter 1 PoE Configuration Commands
:PD searching
:signal
:0
:low
:15400 mW
:0 mW
:0 mW
:0 mW
:0 mA
:0.0 V
1-1