Chapter 1 Mstp Configuration Commands; Mstp Configuration Commands; Active Region-Configuration - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – MSTP

Chapter 1 MSTP Configuration Commands

1.1 MSTP Configuration Commands

1.1.1 active region-configuration

Syntax
active region-configuration
View
MST region view
Parameter
None
Description
Use the active region-configuration command to activate the settings of an MST
(multiple spanning tree) region.
Configuring MST region-related parameters (especially the VLAN mapping table) result
in spanning trees being regenerated. To reduce network topology jitter caused by the
configuration, MSTP (multiple spanning tree protocol) does not regenerate spanning
trees immediately after the configuration; it does this only after you activate the new
MST region-related settings or enable MSTP, and then the new settings can really take
effect.
This command causes the switch to operate with the new MST region-related settings
you configured and spanning trees to be regenerated.
Related command: instance, region-name, revision-level, vlan-mapping modulo,
and check region-configuration.
Example
# Activate the MST region-related settings.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] stp region-configuration
[3Com-mst-region] active region-configuration
Chapter 1 MSTP Configuration Commands
1-1