Radius-Scheme - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – AAA, RADIUS, HWTACACS, EAD
Description
Use the password command to set a password for the local user.
Use the undo password command to cancel the password configured.
Note that, after the local-user password-display-mode cipher-force command is
executed, the password will be displayed in cipher text even though you use the
password command to set the password to be displayed in plain text, that is, in the
simple mode.
Related command: display local-user.
Example
# Set the password of a user named 3Com1 to 20030422 and specify to display the
password in plain text.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] local-user 3Com1
[3Com-luser-3Com1] password simple 20030422

1.1.15 radius-scheme

Syntax
radius-scheme radius-scheme-name
View
ISP domain view
Parameter
radius-scheme-name: Name of a RADIUS scheme, a character string of up to 32
characters.
Description
Use the radius-scheme command to specify the RADIUS scheme to be used by
current ISP domain.
Once an ISP domain is created, it uses the local AAA scheme instead of any RADIUS
scheme by default.
The RADIUS scheme you specified in the radius-scheme command must be an
existing scheme. This command is equivalent to the scheme radius-scheme
command.
Related command: radius scheme, display radius.
Chapter 1 AAA & RADIUS & HWTACACS
1-16
Configuration Commands