Rip Metricin; Rip Metricout - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com]interface Vlan-interface 10
[3Com-Vlan-interface10] undo rip input

2.1.16 rip metricin

Syntax
rip metricin value
undo rip metricin
View
Interface view
Parameter
value: Additional route metric added when receiving a RIP route, ranging from 0 to 16.
By default, the value is 0.
Description
Use the rip metricin command to configure the additional route metric added to the
RIP routes received on an interface.
Use the undo rip metricin command to restore the default value of this additional
route metric.
Related command: rip metricout.
Example
# Set the additional route metric added to RIP routes received on Vlan-interface 10 to
2.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] interface Vlan-interface 10
[3Com-Vlan-interface10] rip metricin 2

2.1.17 rip metricout

Syntax
rip metricout value
undo rip metricout
View
Interface view
Chapter 2 RIP Configuration Commands
2-15