Chapter 1 Dldp Configuration Commands; Dldp Configuration Commands; Display Dldp - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – DLDP

Chapter 1 DLDP Configuration Commands

1.1 DLDP Configuration Commands

1.1.1 display dldp

Syntax
display dldp [ interface-type interface-number ]
View
Any view
Parameter
interface-type: Port type.
interface-number: Port number.
Description
Use the display dldp command to display the configuration information, status
information and neighbor tables of the DLDP-enabled port.
The configuration information of the DLDP-enabled port includes the interval,
authentication mode, password, DLDP operating mode, and DLDP handling mode
after a unidirectional link is detected.
The status information includes the neighbor status, local port status and link
status.
The neighbor table includes the MAC address, port ID, neighbor status and aging
time items.
Example
# Display information about all the DHLP-enabled ports.
<3Com> display dldp
dldp interval 10
dldp work-mode enhance
dldp authentication-mode none
dldp unidirectional-shutdown manual
The port number with DLDP is 2.
interface GigabitEthernet2/0/1
dldp port state : inactive
Chapter 1 DLDP Configuration Commands
1-1