Apply Local-Preference; Apply Origin - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol
Example
# Define an apply clause to import routes to level-2 area.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com]route-policy 10 permit node 10
[3Com-route-policy] apply isis level-2

6.1.7 apply local-preference

Syntax
apply local-preference local-preference
undo apply local-preference
View
Route policy view
Parameter
local-preference: local preference, ranging from 0 to 4294967295.
Description
Use the apply local-preference command to set local preference for routing
information.
Use the undo apply local-preference command to cancel the apply statement
setting.
Related command: if-match interface, if-match acl, if-match ip-prefix, if-match ip
next-hop, if-match cost, if-match tag, route-policy, apply ip next-hop, apply
local-preference, apply origin and apply tag.
Example
# Define an apply statement to set local preference for the routing information to 130.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com]route-policy 10 permit node 10
[3Com-route-policy] apply local-preference 130

6.1.8 apply origin

Syntax
apply origin { igp | egp as-number | incomplete }
undo apply origin
Chapter 6 IP Routing Policy Configuration Commands
6-6