Spf-Delay-Interval; Spf-Slice-Size - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol

4.1.38 spf-delay-interval

Syntax
spf-delay-interval number
undo spf-delay-interval
View
IS-IS view
Parameter
number: Interval of releasing CPU during routing calculation, in the range of 1,000
routes to 50,000 routes. It is 5,000 routes by default.
Description
Use the spf-delay-interval command to set the interval of releasing CPU during SPF
calculation.
Use the undo spf-delay-interval command to restore the default value.
When there are two many routes in the routing table, you can use this command to
release CPU automatically after a certain number of routes are processed in order to
prevent the SPF calculation from occupying the system resources for a long time to
affect the response of the console. The unprocessed routes are to be processed in
one second.
You can adjust the number argument according to the size of the routing table. If the
spf-slice-size command is configured at the same time, the SPF calculation will be
paused if the SPF calculation matches any of the setting.
By default, CPU is released when every 5,000 routes are processed.
Related command: spf-slice-size.
Example
# Set IS-IS to release CPU when every 3,000 routes are processed.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] isis
[3Com-isis] spf-delay-interval 3000

4.1.39 spf-slice-size

Syntax
spf-slice-size seconds
undo spf-slice-size
Chapter 4 Integrated IS-IS Configuration Commands
4-33