Qe Monitor Errpkt Check-Time - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – System Maintenance & Debugging
Description
Use the qe monitor errpkt command to configure error packets detection function on
current interface.
A switch does not detect error packets on current interface by default.
If the switch receives a great number of error packets, it will not be able to send/receive
packets properly. With error packets monitoring enabled, the switch collects information
about received error packets regularly. If error packets are detected, it takes protection
measures to ensure that its interfaces send/receive packets properly.
Example
# Specify to detect error packets that are of runt type on Ethernet4/0/1 interface.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] interface Ethernet 4/0/1
[3Com-Ethernet4/0/1] qe monitor errpkt runt

3.1.18 qe monitor errpkt check-time

Syntax
qe monitor errpkt check-time interval
View
System view
Parameter
interval: Specifies the interval for detecting error packets. The interval argument ranges
from 1 to 3600 (in seconds) and defaults to 5.
Description
Use the qe monitor errpkt check-time command to set the interval for detecting error
packets.
If the switch receives a great number of error packets, it will not be able to send/receive
packets properly. With error packets monitoring enabled, the switch collects information
about received error packets at intervals. If error packets are detected, it takes
protection measures to ensure that its interfaces send/receive packets properly.
Example
# Set the interval for detecting error packets to 50 seconds.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] qe monitor errpkt check-time 50
3-13
Chapter 3 Device Management
Commands