Snmp-Agent Trap Queue-Size - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – SNMP & RMON
View
System view
Parameter
seconds: Aging time, in seconds, ranging from 1 to 2,592,000.
Description
Use the snmp-agent trap life command to set aging time for Trap packets. The Trap
packets exceeding the aging time are discarded.
Use the undo snmp-agent trap life command to restore the default aging time for
Trap packets.
By default, the aging time of SNMP Trap packets is 120 seconds.
After the specified aging time has elapsed, the system drops the trap packet.
Related command: snmp-agent trap enable, snmp-agent target-host.
Example
# Set the aging time for Trap packets as 60 seconds.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] snmp-agent trap life 60

1.1.19 snmp-agent trap queue-size

Syntax
snmp-agent trap queue-size size
undo snmp-agent trap queue-size
View
System view
Parameter
size: Length of a queue, ranging from 1 to 1,000.
Description
Use the snmp-agent trap queue-size command to configure the information queue
length of Trap packet sent to destination host.
Use the undo snmp-agent trap queue-size command to restore the default value.
Related command: snmp-agent trap enable, snmp-agent target-host and
snmp-agent trap life.
Chapter 1 SNMP Configuration Commands
1-18