Info-Center Console Channel - 3Com 7750 Series Command Reference Manual

3Com Swich 7750 Series
Command Reference Guide – Information Center
By default, the name of channel 0 to channel 9 is (in turn) console, monitor, loghost,
trapbuffer, logbuffer, snmpagent, channel6, channel7, channel8, channel9.
Note that the channel names must not be the same with each other.
Example
# Name the channel 0 as execconsole.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] info-center channel 0 name execconsole

1.1.7 info-center console channel

Syntax
info-center console channel { channel-number | channel-name }
undo info-center console channel
View
System view
Parameter
channel-number: Channel number, ranging from 0 to 9, that is, system has ten
channels.
channel-name: Channel name, by default, the name of channel 0 to channel 9 is (in
turn) console, monitor, loghost, trapbuffer, logbuffer, snmpagent, channel6,
channel7, channel8, channel9.
Description
Use the info-center console channel command to configure the channel through
which the log information is output to the console.
Use the undo info-center console channel command to restore the default channel
through which the log information is output to the console.
By default, Ethernet switches output log information to the console.
This command takes effect only after the information center function is enabled.
Related command: info-center enable, display info-center.
Example
# Configure to output log information to the console through channel 7.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] info-center console channel 7
Chapter 1 Information Center Commands
1-8