3Com 7750 Series Command Reference Manual page 1071

3Com Switch 7750 Series
Command Reference Guide – System Maintenance & Debugging
Parameter
sysname: System name of the Ethernet switch. It is a character string in length of 1 to
30 characters. By default, it is 3Com.
Description
Use the sysname command to set the system name of the Ethernet switch. Changing
the system name will affect the CLI prompt. For example, if the system name of the
switch is 3Com, the prompt for user view is <3Com>.
Use the undo sysname command to restore the default system view of the Ethernet
switch.
Example
# Set the system name of the Ethernet switch to 3ComLANSwitch.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] sysname 3ComLANSwitch
[3ComLANSwitch]
1.1.8 system-view
Syntax
system-view
View
User view
Parameter
None
Description
Use the system-view command to enter system view from user view.
Related command: quit and return.
Example
# Enter system view from user view.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com]
Chapter 1 Basic System Configuration &
1-6
Debugging Commands