Multicast Static-Router-Port Vlan - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Multicast
Caution:
Up to 256 static router ports can be configured in a system.
Reflection ports cannot be configured as static router ports.
A port in a multicast sub-VLAN cannot be configured as a static router port.
Example
# Configure Ethernet1/0/1 in VLAN 2 as a static router port.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] vlan 2
[3Com-vlan2] multicast static-router-port Ethernet 1/0/1

2.1.10 multicast static-router-port vlan

Syntax
multicast static-router-port vlan vlan-id
undo multicast static-router-port vlan vlan-id
View
Ethernet port view
Parameter
vlan-id: ID of the specified VLAN, in the range of 1 to 4,094.
Description
Use the multicast static-router-port vlan command to specify the current port in the
VLAN as a static router port.
Use the undo multicast static-router-port vlan command to disable the static router
port configuration.
By default, an Ethernet port is not specified as a static router port.
Chapter 2 Common IP Multicast Configuration Commands
2-12