3Com 7750 Series Command Reference Manual page 674

3Com Switch 7750 Series
Command Reference Guide – AAA, RADIUS, HWTACACS, EAD
Parameter
with-domain: Specifies to include ISP domain names in the user names to be sent to
RADIUS servers.
without-domain: Specifies to exclude ISP domain names from the user names to be
sent to RADIUS servers.
Description
Use the user-name-format command to set the format of the user names to be sent to
RADIUS server
By default, except for the default RADIUS scheme "system", the user names sent to
RADIUS servers in any RADIUS scheme carry ISP domain names.
Generally, an access user is named in the userid@isp-name format. isp-name behind
the @ character represents the ISP domain name, by which the device determines
which ISP domain it should ascribe the user to. However, some old RADIUS servers
cannot accept the user names that carry ISP domain names. In this case, it is
necessary to remove the domain names carried in the user names before sending the
user names to the RADIUS server. For this reason, the user-name-format command is
available for you to specify whether or not ISP domain names are carried in the user
names sent to the RADIUS server.
Note:
For a RADIUS scheme, if you have specified that no ISP domain names are carried in
the user names, you should not use this RADIUS scheme in more than one ISP domain.
Otherwise, such errors may occur: the RADIUS server regards two different users
having the same name but belonging to different ISP domains as the same user
(because the user names sent to it are the same).
Related command: radius scheme.
Example
# Specify that the user names sent to a RADIUS server in RADIUS scheme radius1
does not carry ISP domain names.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] radius scheme radius1
[3Com-radius-radius1] user-name-format without-domain
Chapter 1 AAA & RADIUS & HWTACACS
1-53
Configuration Commands