Display Dhcp Server Ip-In-Use - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – DHCP
IP Range from 4.0.0.0
IP Range from 5.5.5.0
IP Range from 5.5.5.2

1.1.18 display dhcp server ip-in-use

Syntax
display dhcp server ip-in-use { ip ip-address | pool [ pool-name ] | interface
[ interface-type interface-number ] | all }
View
Any view
Parameter
ip ip-address: Specifies an IP address.
pool [ pool-name ]: Specifies a global address pool. The pool-name argument, a string
of 1 to 35 characters, is the name of an address pool. If you do not provide this
argument, this command applies to all global address pools.
interface [ interface-type interface-number ]: Specifies a VLAN interface. If you do not
specify a VLAN interface, this command applies to all VLAN interfaces.
all: Specifies all address pools.
Description
Use the display dhcp server ip-in-use command to display the address binding
information of one IP address, the specified DHCP address pool(s) or all DHCP
address pools.
Related command: reset dhcp server ip-in-use.
Example
# Display the address binding information of all DHCP address pools.
<3Com> display dhcp server ip-in-use all
Global pool:
IP address
2.2.2.2
Interface pool:
IP address
5.5.5.1
--- total 2 entry ---
Hardware address
44444-4444-4444
Hardware address
0050-ba28-930a
1-17
Chapter 1 DHCP Server Configuration Commands
to 4.255.255.255
to 5.5.5.0
to 5.5.5.255
Lease expiration
NOT Used
Lease expiration
Jun 5 2003 10:56: 7 AM Auto:COMMITED
Type
Manual
Type