Peer Route-Update-Interval - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol
Example
# Apply the Route-policy named test-policy to the route coming from the peer/peer
group test.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] bgp 100
[3Com-bgp] peer test route-policy test-policy import

5.1.52 peer route-update-interval

Syntax
peer group-name route-update-interval seconds
undo peer group-name route-update-interval
View
BGP view
Parameter
group-name: Peer group name, containing 1 to 47 characters.
seconds: Minimum interval at which UPDATE packets are sent. It is in the range of 0
to 600 seconds. By default, the advertisement interval is 5 seconds for internal peer
group and 30 seconds for external peer group.
Description
Use the peer route-update-interval command to configure the interval at which the
same route update packet is sent to the peer group. .
Use the undo peer route-update-interval command to restore the default interval.
Example
# Configure the interval of the BGP peer group "test" sending the route update packet
as 10 seconds.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] bgp 100
[3Com-bgp] peer test route-update-interval 10
Chapter 5 BGP Configuration Commands
5-46