Reset Dhcp Server Ip-In-Use; Reset Dhcp Server Statistics - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – DHCP

1.1.30 reset dhcp server ip-in-use

Syntax
reset dhcp server ip-in-use { all | interface [ interface-type interface-number ] | ip
ip-address | pool [ pool-name ] }
View
User view
Parameter
all: Clears the dynamic address binding information about all IP addresses.
interface [ interface-type interface-number ]: Clears the dynamic address binding
information about a specified interface address pool. If you do not specify the
interface-number argument, this command clears the dynamic address binding
information about all interface address pools.
ip ip-address: Clears the dynamic address binding information about a specified IP
address.
pool [ pool-name ]: Clears the dynamic address binding information about a specified
address pool. The pool-name argument, a string of 1 to 35 characters, is the name of
an address pool. If you do not provide this argument, this command clears the
dynamic address binding information about all global address pools.
Description
Use the reset dhcp server ip-in-use command to clear the specified or all dynamic
address binding information.
Related command: display dhcp server ip-in-use.
Example
# Clear the dynamic address binding information about the IP address 10.110.1.1.
<3Com> reset dhcp server ip-in-use ip 10.110.1.1

1.1.31 reset dhcp server statistics

Syntax
reset dhcp server statistics
View
User view
Parameter
None
Chapter 1 DHCP Server Configuration Commands
1-30