Display Pim Routing-Table - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Multicast
Table 5-3 Description on the fields of the display pim neighbor command
Neighbor's Address
Interface name
Uptime
Expires

5.1.8 display pim routing-table

Syntax
display pim routing-table [ { { *g [ group-address [ mask { mask-length | mask } ] ] |
**rp [ rp-address [ mask { mask-length | mask } ] ] } | { group-address [ mask
{ mask-length | mask } ] | source-address [ mask { mask-length | mask } ] } * } |
incoming-interface { interface-type interface-number | null } | { dense-mode |
sparse-mode } ] *
View
Any view
Parameter
**rp: (*, *, RP) route entry.
*g: (*, G) route entry.
group-address: Address of the multicast group.
source-address: IP address of the multicast source.
incoming-interface interface-type interface-number: View the route entry whose
incoming VLAN interface is the specified VLAN interface.
null: Specifies the VLAN interface type as Null.
dense-mode: Specifies the multicast routing protocol as PIM-DM.
sparse-mode: Specifies the multicast routing protocol as PIM-SM.
Description
Use the display pim routing-table command to view information about the PIM
multicast routing table.
The displayed information about the PIM multicast routing table includes the SPT
information and RPF information.
Field
5-8
Chapter 5 PIM Configuration Commands
Description
Neighbor address
VLAN interface where the neighbor has
been discovered
Time passed since the multicast group
has been discovered
Specifies when the member will be
removed from the group