Peer Public-As-Only; Peer Reflect-Client - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol
# Perform the similar configuration on the peer.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] bgp 100
[3Com-bgp] peer 10.1.100.1 password simple 3Com

5.1.48 peer public-as-only

Syntax
peer group-name public-as-only
undo peer group-name public-as-only
View
BGP view
Parameter
group-name: Name of a peer group, containing 1 to 47 characters.
Description
Use the peer public-as-only command to configure not to carry the AS number when
transmitting BGP update packets.
Use the undo peer public-as-only command to configure to carry the AS number
when transmitting BGP update packets.
By default, private AS number is carried when transmitting BGP update packets.
Generally, BGP transmits BGP update packets with the AS number (either public AS
number or private AS number). To enable some outbound routers to ignore the AS
number when transmitting update packets, you can configure not to carry the AS
number when transmitting BGP update packets.
Example
# Configure not to carry the private AS number when transmitting BGP update
packets to the peer group named test.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] bgp 100
[3Com-bgp] peer test public-as-only

5.1.49 peer reflect-client

Syntax
peer group-name reflect-client
Chapter 5 BGP Configuration Commands
5-43