Ipx Rip Timer Update; Ipx Route Load-Balance-Path - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide — IP / IPX
[3Com] ipx rip multiplier 5

3.1.12 ipx rip timer update

Syntax
ipx rip timer update seconds
undo ipx rip timer update
View
System view
Parameter
seconds: RIP update interval, in seconds. It is in the range of 10 to 60,000.
Description
Use the ipx rip timer update command to configure a RIP update interval.
Use the undo ipx rip timer update command to restore the default value.
By default, the update interval of IPX RIP is 60 seconds.
Related command: ipx rip multiplier
Example
# Set the RIP update interval to 30 seconds.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] ipx rip timer update 30

3.1.13 ipx route load-balance-path

Syntax
ipx route load-balance-path paths
undo ipx route load-balance-path
View
System view
Parameter
paths: The maximum number of equivalent routes to the same destination. It is in the
range of 1 to 64.
Chapter 3 IPX Configuration Commands
3-14