Rmon Event - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – SNMP & RMON

2.1.8 rmon event

Syntax
rmon event event-entry [ description string ] { log | trap trap-community | log-trap
log-trapcommunity | none } [ owner text ]
undo rmon event event-entry
View
System view
Parameter
event-entry: Event entry line number, in the range of 1 to 65535.
description string: Specifies the event description, a string comprising 1 to 127
characters.
log: Logs events.
trap trap-community: Defines the event as a trap event and specifies the community
name of the NMS that receives the trap messages.
log-trap log-trapcommunity: Defines the event as a log and trap event and specifies
the community name of the NMS that receives the log messages.
none: Specifies that the event triggers no action.
owner text: Specifies the creator of the event entry. The text argument is a string
comprising 1 to 127 characters.
Description
Use the rmon event command to add an entry to the event table.
Use the undo rmon event command to delete an entry from the event table.
When adding an event entry to an event table, you need to specify the event index. You
need also to specify the corresponding actions, including logging the event, sending
trap messages to the NMS, and the both, for the network device to perform
corresponding operation when an alarm referencing the event is triggered.
Example
# Add the event entry numbered 10 to the event table and configure it to be a log event.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] rmon event 10 log
Chapter 2 RMON Configuration Commands
2-11