Mirroring-Group Remote-Probe Vlan; Remote-Probe Vlan - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Mirroring

1.1.11 mirroring-group remote-probe vlan

Syntax
mirroring-group group-id remote-probe vlan remote-probe-vlan-id
undo mirroring-group group-id remote-probe vlan remote-probe-vlan-id
View
System view
Parameter
group-id: Group number of a mirroring group, in the range of 1 to 20.
remote-probe vlan remote-probe-vlan-id: Specifies the remote-probe VLAN for the
mirroring group.
Description
Use the mirroring-group remote-probe vlan command to specify the remote-probe
VLAN for a mirroring group.
Use the undo mirroring-group remote-probe vlan command to remove the
configuration of remote-probe VLAN for a mirroring group.
Example
# Configure VLAN 100 as the remote-probe VLAN.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] mirroring-group 1 remote-probe vlan 100

1.1.12 remote-probe vlan

Syntax
remote-probe vlan enable
undo remote-probe vlan enable
View
VLAN view
Parameter
None
Description
Use the remote-probe vlan enable command to configure the current VLAN as the
remote-probe VLAN. After you input the command, the system will check whether the
1-12
Chapter 1 Mirroring Commands