Port-Security Enable - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Port Security & Port Binding
Vlan id assigned is NULL
Disableport Timeout: 20 s
OUI value
GigabitEthernet1/0/1 is link-down
Port mode is Userlogin
NeedtoKnow mode is needtoknowonly
Intrusion mode is disableport
Max mac-address num is 100
Stored mac-address num is 0
Authorization is permit

1.1.2 port-security enable

Syntax
port-security enable
undo port-security enable
View
System view
Parameter
None
Description
Use the port-security enable command to enable port security.
Use the undo port-security enable command to disable port security.
By default, port security is disabled.
Field
1-3
Chapter 1 Port Security Commands
Description
The delivered VLAN ID is null.
The temporary port-disabling time is 20
seconds.
The next line displays OUI value.
The link status
GigabitEthernet 1/0/1 is "down".
The security mode of the port is
Userlogin.
The NTK mode is ntkonly.
The intrusion detection
disableport.
The maximum number
addresses allowed on the port is 100.
No MAC address is stored.
Authorization information delivered by
the RADIUS server will be applied to the
port.
of the port
mode is
of MAC