Lacp Enable; Lacp Port-Priority - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide — Link Aggregation
Use the undo hash command to cancel the configuration.
By default, the parameter used by the HASH algorithm in link aggregation is ip.
Example
# For LPU 2, use the destination IP address as the parameter of the HASH algorithm.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] hash dstip ioboard solt 2

1.1.6 lacp enable

Syntax
lacp enable
undo lacp enable
View
Ethernet port view
Parameter
None
Description
Use the lacp enable command to enable the LACP protocol.
Use the undo lacp enable command to disable the LACP protocol.
Example
# Enable the LACP protocol on Ethernet1/0/1.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] interface Ethernet1/0/1
[3Com-Ethernet1/0/1] lacp enable

1.1.7 lacp port-priority

Syntax
lacp port-priority port-priority-value
undo lacp port-priority
View
Ethernet port view
Chapter 1 Link Aggregation Configuration Commands
1-7