Igmp Enable - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Multicast
Value of maximum query response time for IGMP(in seconds): 10
Value of robust count for IGMP: 2
Value of startup query interval for IGMP(in seconds): 15
Value of last member query interval for IGMP(in seconds): 1
Value of query timeout for IGMP version 1(in seconds): 400
Policy to accept IGMP reports: none
Querier for IGMP: 10.153.17.99 (this router)
IGMP group limit is 256
No IGMP group reported
Table 4-2 Description on the fields of the display igmp interface command
IGMP version
query interval
querier timeout
max query response time
robust count
startup query interval
last member query interval
query timeout
Policy to accept IGMP reports
Querier for IGMP
IGMP group limit

4.1.3 igmp enable

Syntax
igmp enable
Field
4-3
Chapter 4 IGMP Configuration Commands
Description
IGMP version
Interval of general query
Timeout time of the querier
Maximum time of response to query
IGMP robust count, that is, the times of
sending IGMP group-specific
packets before the
receives the IGMP leave packet from the
host
The startup interval of IGMP to send
query packets
The interval of
group-specific query packets when the
IGMP querier receives the IGMP leave
packets from the host
Query timeout in IGMP version 1
The filtering policy of the IGMP multicast
group to control the access to IP
multicast groups
IGMP querier
Limit on the number of IGMP groups
added to the VLAN interface. The router
does not process new IGMP packets
when the number of IGMP packet
exceeds the limit
query
IGMP querier
sending IGMP