Display Rmon History - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – SNMP & RMON
Generates eventLog 1.2 at 0days 00h:02m:27s.
Description: The alarm formula defined in private alarm table 1,
less than(or =) 100 with alarm value 0. Alarm sample type is absolute.
Table 2-3 Description on the fields of the display rmon eventlog command
Event table
abc
VALID
Generates eventLog 1.1 at 0days
00h:01m:39s
Description

2.1.4 display rmon history

Syntax
display rmon history [ interface-type interface-number ]
View
Any view
Parameter
interface-type: Interface type.
interface-number: Interface number.
Description
Use the display rmon history command to display the RMON history information
about a specified port. The information about the latest sample, including utilization, the
number of errors, the total number of packets and so on, is also displayed.
Related command: rmon history.
Example
# Display the RMON history information about the RMON port Ethernet2/0/1.
<3Com> display rmon history ethernet 2/0/1
History control entry 1 owned by abc is VALID
Samples interface
Sampling interval
Latest sampled values :
Field
: Ethernet2/0/1<ifEntry.642>
: 10(sec) with 10 buckets max
2-4
Chapter 2 RMON Configuration Commands
Description
Event entries
Entry creator
The status of the line corresponding to the
line is valid
Time when the event is triggered. The event
may be triggered several times. 1.1
indicates the time event 1 is first triggered
Description of an event log