Nas-Ip - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – AAA, RADIUS, HWTACACS, EAD
As a local RADIUS authentication server, the switch does not support EAP
authentication.
Related command: radius scheme and state.
Example
# Create a network access server granted by the RADIUS authentication server with an
IP address of 10.110.1.2 and a shared key of aabbcc.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] local-server nas-ip 10.110.1.2 key aabbcc

1.2.10 nas-ip

Syntax
nas-ip ip-address
undo nas-ip
View
RADIUS scheme view
Parameter
ip-address: Source IP address for RADIUS packets, an IP address of this device. This
address can neither be the all zero address nor be a Class-D address.
Description
Use the nas-ip command to set the source IP address used by the switch to send
RADIUS packets.
Use the undo nas-ip command to remove the source IP address setting.
Note:
The nas-ip command in RADIUS scheme view has the same function as the radius
nas-ip command in system view; and the priority of configuration in RADIUS scheme
view is higher than in system view.
You can specify the source address used to send RADIUS packets to prevent the
unreachability of the packets returned from the server due to physical interface trouble.
It is recommended to use the loopback interface address as the source IP address.
By default, the IP address of the outbound interface is used as the source IP address of
the packet.
Chapter 1 AAA & RADIUS & HWTACACS
1-34
Configuration Commands