3Com 7750 Series Command Reference Manual page 1069

3Com Switch 7750 Series
Command Reference Guide – System Maintenance & Debugging
1.1.4 language-mode
Syntax
language-mode { chinese | english }
View
User view
Parameter
chinese: Sets the CLI language environment to Chinese.
English: Sets the CLI language environment to English.
Description
Use the language-mode command to toggle between the language modes (that is,
language environments) of the command line interface (CLI) to meet your requirement.
By default, the CLI language mode is english.
Example
# Toggle from the english mode to the chinese mode.
<3Com> language-mode chinese
1.1.5 quit
Syntax
quit
View
Any view
Parameter
None
Description
Use the quit command to return from current view to lower level view, or exit the system
if current view is user view.
The following lists the three levels of views available (from lower level to higher level):
User view
System view
VLAN view, Ethernet port view, and so on
Related command: return and system-view.
Chapter 1 Basic System Configuration &
1-4
Debugging Commands