Dhcp-Server Ip; Display Dhcp-Security - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – DHCP

2.1.9 dhcp-server ip

Syntax
dhcp-server groupNo ip ip-address&<1-8>
undo dhcp-server groupNo
View
System view
Parameter
groupNo: DHCP server group number, ranging from 0 to 19.
ip-address&<1-8>: IP address of the DNS server. &<1-8> indicates that up to eight IP
addresses can be input, with any two IP addresses separated by a space.
Description
Use the dhcp-server ip command to configure the DHCP server IP address(es) in a
specified DHCP server group.
Use the undo dhcp-server command to remove all DHCP server IP addresses in a
DHCP server group.
Related command: dhcp-server, and display dhcp-server.
Example
# Configure three DHCP server IP addresses 1.1.1.1, 2.2.2.2, and 3.3.3.3 for DHCP
server group 1, so that this group contains three DHCP servers (server 1, server 2 and
server 3).
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] dhcp-server 1 ip 1.1.1.1 2.2.2.2 3.3.3.3

2.1.10 display dhcp-security

Syntax
display dhcp-security [ ip-address | dynamic | static ]
View
Any view
Parameter
ip-address: IP address. This argument is used to display the user address entry with
the specified IP address.
Chapter 2 DHCP Relay Configuration Commands
2-7