3Com 7750 Series Command Reference Manual page 1106

3Com Switch 7750 Series
Command Reference Guide – Remote Ping
View
Remote Ping test group view
Parameter
ip-address: Destination IP address in a test.
Description
Use the destination-ip command to configure the destination IP address in the test.
Use the undo destination-ip command to delete the configured destination IP
address.
By default, no destination IP address is configured for any test.
Example
# Set the destination IP address in the test of the "administrator-icmp" test group to
1.1.1.99.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] remote ping administrator icmp
[3Com-remote ping-administrator-icmp] destination-ip 1.1.1.99
1.1.3 display remote ping
Syntax
display remote ping { result | history } [ administrator-name operation-tag ]
View
Any view
Parameter
result: Displays the test result.
history: Displays the test history.
administrator-name: Name of the administrator creating the test.
operation-tag: Test operation tag.
Description
Use the display remote ping command to view test result(s).
If a test group is specified using the arguments of administrator-name and
test-operation-tag, the system displays only the test result of the group; if not, it
displays the test results of all the test groups.
Related command: test-enable.
Chapter 1 Remote Ping Commands
1-2