Display Arp Entry-Limit - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – ARP
text: String used to filter ARP mapping entries.
Description
Use the display arp | command to display the ARP mapping entries related to string in
a specified way.
Related command: arp static, reset arp.
Example
# Display all the ARP mapping entries that contain the string "77".
<3Com>dis arp | include 77
IP Address
192.168.0.77
--- 1 entry found
# Display all the ARP entries that do not contain the string "68".
<3Com>dis arp | exclude 68
IP Address
10.2.72.162
--- 1 entry found
Refer to Table 1-1 for the description on the above output information.

1.1.11 display arp entry-limit

Syntax
display arp entry-limit [ interface interface-type interface-number ]
View
Any view
Parameter
Interface-type: Port type.
Interface-number: Port number.
Description
Use this command to display the limit of the number of ARP entries.
Type: S-Static D-Dynamic
MAC Address
0000-e8f5-6a4a
---
Type: S-Static D-Dynamic
MAC Address
000a-000a-0aaa
---
1-9
Chapter 1 ARP Configuration Commands
VLAN ID Port Name / AL ID
1 Ethernet1/0/2
VLAN ID Port Name / AL ID
N/A N/A
Aging Type
12 D
Aging Type
N/A S